Mono Clamp
988,72 ₺
Monolithic, 5mm thick Genuine Leather The clamp made using a central D-ring.
Our handmade products are not ready-made products, but they are produced as orders come in. Each product is produced according to the order order, and our production process may be extended during our campaign periods when our orders are high. Production processes are notified to you via e-mail and you can follow up.
In order for you to see our workforce and production capacity in our workshop and to decide whether to place your orders accordingly, we have “Estimated Production Time of Our Workshop” There is an information area in the form of.
This information calculates the production time in our workshop by checking every order we receive from our website, especially the handmade ones.
The number of days you see in this field is intended to give you information about the earliest date your order can be produced.
Possible Workshop Estimated Production Times you may see and what they mean:
- Normal : Indicates that our workshop is operating routinely and within the expected delivery and production times.
- Busy: This means that our workshop is busier than its routine operation and that orders may be delayed beyond their estimated delivery times.
- Busy: It shows that our workshop's production time has exceeded a week, but we are preparing your products with all our energy and love. :)
- Size GuideIn this short guide, we'll give you the details on how to take your body measurements. Any custom-made product you buy, such as a collar, leash, or harness, should fit you perfectly and be comfortable. Let's quickly review how to measure your body for everything you may need. These measurements will come in handy when you're shopping. Before you start:
- Make sure that the tape measure is not stretched. (If you do not have a tape measure, you can do this with a rope and a ruler. After taking the measurement with the rope, you can find the length of the rope with the ruler.)
- To ensure accurate measurements, measure both wrists, ankles, legs, etc. (Sometimes they don't match!)
How to Measure Arm Length?
There are two basic points to consider when measuring arm length. First, care should be taken to keep the elbow straight during measurement. Situations such as bending the elbow will result in a lower arm measurement than normal. The second point to consider is to start from the highest point of the shoulder and take measurements down to the beginning of the wrist. Starting from the middle points of the shoulder will also result in lower measurements than normal.How to Measure Waist?
When measuring your waist, the belly button can be used as a measure. The most ideal waist measurement is taken below the belly button. Care should be taken to ensure that the measuring device does not slip when moving it around your waist and to your back. If the tape measure is not aligned, it may result in a thicker waist measurement than normal. A mirror can be used to make sure that the front and back are parallel or someone can help you.How to Take Hip Measurements?To measure your hips correctly, first of all, your knees should come together and your feet should be slightly apart. Touching your feet completely together will result in incorrect measurements. A natural, upright posture is the most important detail for taking all body measurements. Your hip measurements should be taken from the thickest point of your hips. Make sure that the measuring tool is held correctly, starts from the zero point, and tightly surrounds your entire hip. You can get help from someone else for the most ideal measurement process. It can be difficult to measure yourself, but it is possible.How to Measure Leg Length?
The measurement of leg length is stated as the measurement from the pelvic bone to the protrusion of the ankle bone. Since it may be difficult to measure the entire leg at once when measuring yourself, you can first measure up to the knee. Then, these values can be added up by measuring from the knee to the ankle.How to Take Breast Measurements?
Body size, is measured from the line just under the chest. This line is wrapped with a tape measure chest body size It is very important to hold the tape measure in a way that does not pinch the skin to obtain accurate results.How to Take Neck Measurements?
Keep your neck straight while looking at a point in front of you. You can measure the neck circumference with your tape measure from the point at the lower border of the larynx (Adam's apple).How to Measure Wrist?
Wrap the tape measure, string or strip of paper around your wrist and mark the point where the two ends meet with a pencil. Then measure the area you marked on the tape measure or paper with a millimetric (mm) ruler. The value you find by measuring will give you your wrist size.How to Measure Upper Leg?
Stand upright with your feet shoulder-width apart. You can measure your upper leg circumference using a tape measure from the midpoint between your hipbone and kneebone.How to Take Shoulder Measurements?
Again, while standing upright, take the measurement by wrapping the tape measure or string around the most vertical points of your shoulders. Chest: While standing upright, after exhaling, take the measurement by wrapping the tape measure or string around your entire torso, over your nipples.
- Discreet Packaging
- Worldwide Shipping
Yekpare, 5mm kalınlığında Genuine Leather kullanılarak yapılan kelepçenin merkezi bir D halkası mevcuttur. Yanında bir adet kelepçe ara bağlantısı olarak yaylı halka gönderilmektedir. Hem ayak hem el için kullanılabilmektedir.
Q & A
Benzer Ürünler…
It is made entirely by hand from 2 -2.5 mm hard leather. It is suitable for almost every size thanks to its adjustable belts. For a special size, it is enough to specify it as a note during the ordering phase.
Made of genuine leather, the part surrounding the wrist is soft and 6.5cm wide, and the belt part is 3.5cm wide. There are 2 D rings, 3mm thick and 4cm wide. The leather thickness is 5mm and it is made entirely by hand. Handcuff It is suitable for almost all body sizes between 14cm and 24cm.
- All Belts and straps are adjustable.
- First-class genuine leather with a thickness of 2 – 4 mm, resistant to body fluids, is used.
- Gold, nickel and antique color accessories can be used upon request.
- The edges of the strap are carefully polished to prevent damage to the skin and are sealed with silicone-based wax.
- All of our products are made by hand.
- The wire thickness of the metal accessories used is minimum 4mm and maximum 6mm.
- Different colors and special designs can be produced according to your requests.
- Our products are under our warranty for repair and maintenance in case of any damage for one year.
- All Belts and straps are adjustable.
- First-class genuine leather with a thickness of 2 – 4 mm, resistant to body fluids, is used.
- Gold, nickel and antique color accessories can be used upon request.
- The edges of the strap are carefully polished to prevent damage to the skin and are sealed with silicone-based wax.
- All of our products are made by hand.
- The wire thickness of the metal accessories used is minimum 4mm and maximum 6mm.
- Different colors and special designs can be produced according to your requests.
- Our products are under our warranty for repair and maintenance in case of any damage for one year.
More aesthetic, more durable.. This one has the appropriate weight and balance for Florentine. flogger Give yourself a new style with. Aesthetic and strong, soft and heavy.
Poi Flogger, Consists of 45 fringes. Tails / Falls are 1cm wide and 2mm thick. Made of genuine leather. The approximate weight of a poi flogger is around 350-400 gr. It can be produced as single or double upon request. The manufacturing process is 3 business days after your order is finalized.
- All Belts and straps are adjustable.
- First-class genuine leather with a thickness of 2 – 4 mm, resistant to body fluids, is used.
- Gold, nickel and antique color accessories can be used upon request.
- The edges of the strap are carefully polished to prevent damage to the skin and are sealed with silicone-based wax.
- All of our products are made by hand.
- The wire thickness of the metal accessories used is minimum 4mm and maximum 6mm.
- Different colors and special designs can be produced according to your requests.
- Our products are under our warranty for repair and maintenance in case of any damage for one year.
BDSM Handcuff The set is made of genuine leather, the part surrounding the wrist is 6cm wide and the belt part is 3cm wide. There are 3 4mm thick D rings. The leather is double-layered on both the strap and the parts surrounding the wrists and is approximately 6mm thick. The cuffs are suitable for all wrists with a thickness of 14cm to 25cm.
All Our Products Are Handmade
Our products are hand-made in our own workshop. Each order can be custom-made and all the products we produce have a one-year maintenance and repair warranty.
You can request special production for products that you cannot find on our site and have them produced specifically for you.
Reviews
There are no reviews yet